PRS

PRS Guitars was founded by guitarist and luthier Paul Reed Smith in 1985. Paul Reed Smith Guitars is a leading manufacturer of high-end electric guitars, manufacturer headquartered in Stevensville, Maryland, US.
Bodies of PRS guitars are crafted of mahogany, with a maple top on most models. They often feature highly figured tops, including flame maple, quilt maple and figured maple creating the effect of tiger stripes. PRS necks are usually made from mahogany, although some models feature maple or Indian or Brazilian rosewood necks; fingerboards are made of rosewood. PRS's signature fret markers include the lower end moons, and the higher end birds. The moons appear similar to standard dot inlays, but have a crescent more prominent than the rest of the dot. The bird inlays feature nine or ten different birds inlayed at the appropriate frets. Inlay materials have included semiprecious stones; iridescent shells, including abalone and abalone laminates; gold; and even unearthed ivory from the (extinct) woolly mammoth.
PRS Pickups are designed and wound in-house; PRS is more secretive about magnet and wire type and construction than some aftermarket pickup manufacturers. PRS humbucking pickups have gone by many names, including HFS (Hot, Fat, and Screams); Vintage Bass; McCarty; Santana I, II, and III; Archtop; Dragon I and II; Artist I through IV; #6, #7, #8, #9, and #10, RP (after the initials of the designer, Ralph Perucci) and Soapbar. Further adding to the obscurity, many of the above pickup types are actually a pair of pickups wound in opposing directions, one intended for the neck and one for the bridge position.
Finishes: PRS is known for "popping the grain" on their figured maple topped instruments, a process that accents the '3D' quality of the maple through a multistep staining process. Finishes are transparent, translucent (often with bursts), or opaque and are automotive-grade polyurethane or satin nitrocellulose, meaning that in some instances, the paints were intended for automotive use.
Nuts are synthetic; tuners are of PRS' own design, although some models feature Korean-made Kluson-style tuners. PRS guitars feature three original bridge designs: a one-piece pre-intonated stoptail, an intonatable is unique to PRS and can be used because PRS manufacturing tolerances are so tight, guaranteeing that the distance between witness points will be within a few thousandths of an inch from guitar to guitar.
This design does not however allow intonation to be adjusted to compensate for variations in string thickness or drop tuning. Two other designs are the PRS vibrato, which resembles a vintage Fender Stratocaster unit but with much better tonal stability due to less friction, and the more recent compensated wrapover tailpeice, which allows for height and intonation adjustment.